Greetings,
The Waste Confidence Directorate received
feedback that the webcast for the November 14 afternoon scoping meeting
cut off at 4pm EST. We were able to get the webcast running again after
a short delay; however, if you missed the end of that meeting, you can
view archived video of the meeting at http://video.nrc.gov/. After you
open the webpage, scroll down to the table of Archived Videos. The
afternoon scoping meeting is titled: Waste Confidence Scoping Meeting
for the Environmental Impact Statement (Part 1). The evening meeting
(Part 2) is also available for viewing.
Transcripts for the November 14 meetings are now available in ADAMS:
Afternoon
meeting transcript (ADAMS Accession No. ML12331A347):
http://adamswebsearch2.nrc.gov/webSearch2/main.jsp?AccessionNumber='ML12331A347
Evening
meeting transcript (ADAMS Accession No. ML12331A353):
http://adamswebsearch2.nrc.gov/webSearch2/main.jsp?AccessionNumber='ML12331A353
If
you missed the November 14 meetings, please join us for our December 5
(1pm-4pm EST) and December 6 (9pm-12am EST) webinars. The information
presented and format of the webinars will be the same as the November
meetings. The NRC staff will start each webinar with a short
presentation (view the slides here), and then we’ll open the phone lines
for your questions and comments. The webinars will be identical, and
both will be transcribed so any comments presented over the phone will
be included in the Waste Confidence docket.
To register for
the December 5 or 6 webinars, please see our meeting notice (ADAMS
Accession No. ML12326A911):
http://pbadupws.nrc.gov/docs/ML1232/ML12326A911.pdf
You can also call
Ms. TR Rowe at 1-800-368-5642, ext. 492-3133 or Ms. Susan Wittick, ext.
492-3187 if you have questions about the webinars.
And
finally, we have updated our Waste Confidence website with some
Frequently Asked Questions (FAQs):
http://www.nrc.gov/waste/spent-fuel-storage/wcd/faq.html
Sincerely,
Staff of the Nuclear Regulatory Commission
Waste Confidence Directorate
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment